How to Write a Capability Statement for Government Contracts
A capability statement is a one-page summary of what your company does for government buyers. Here's what to include, how to write it with no past performance, and how to use it.
To write a capability statement for government contracts, put five things on one page: a short company overview, your core competencies, your past performance (or your team’s relevant experience if the company is new), what makes you different, and your company data, including your UEI, CAGE code, NAICS codes, certifications and a direct point of contact. Write it for a contracting officer or prime contractor who will skim it in under a minute, keep every detail consistent with your SAM.gov registration, and tailor the top half to the agency or prime you’re sending it to.
That’s the short answer. Below is how to build each section, how to handle it when you have no past performance yet, and where a capability statement actually gets used.
What a capability statement is (and who reads it)
A capability statement is your company’s one-page resume for government buyers. It isn’t a proposal, and it isn’t a brochure. Its job is to help the reader decide quickly whether you belong on their list of possible vendors or teaming partners.
Three kinds of readers see it most often:
- Contracting officers and specialists doing market research before they write a solicitation.
- Small business specialists at agencies, who match small businesses with upcoming buys.
- Prime contractors looking for subcontractors to fill part of a contract they’re bidding or have already won.
All three are busy, and all three are scanning for fit. Can you do this work? Are you the right size and socioeconomic status? Can they verify you? How do they reach you?
Why capability statements matter in federal contracting
Before an agency buys something, it does market research. The Federal Acquisition Regulation says market research can include contacting people in industry, publishing requests for information, and reviewing systems like SAM.gov and the SBA’s Dynamic Small Business Search (FAR 10.002).
That research decides a lot. Under the “rule of two,” a contracting officer sets a buy aside for small businesses when they reasonably expect offers from at least two responsible small businesses at fair market prices (FAR 19.502-2). When you answer a sources sought notice or an RFI with a clear capability statement, you’re giving the agency evidence it can use in that decision.
The SBA puts it simply: your SAM profile is like a resume, so describe your business accurately and with the terms buyers search for (SBA). Your capability statement is the version of that resume you hand someone directly.
What to include in a capability statement
Most strong capability statements use the same building blocks. Here’s what goes in each one.
1. Company overview
Two to four sentences on who you are and who you serve. Lead with what you do, not your origin story.
Weak: “Founded with a passion for excellence, we are committed to exceeding expectations.”
Stronger: “We provide commercial janitorial and facility maintenance services for federal office buildings and clinics across North Texas.”
Specific beats polished. A reader should know your service area and service type after one sentence.
2. Core competencies
A short bullet list of the services you actually deliver, written in the language buyers use in their statements of work. If agencies call it “custodial services,” don’t call it “cleaning solutions.”
Keep it to the work you can perform today, and make sure it lines up with your NAICS codes. If your competencies say “IT help desk” but your only NAICS code is a management consulting code, the reader will notice. Our guide to choosing NAICS codes walks through how to get that fit right.
3. Past performance
List two or three relevant projects. For each, give the customer type (agency name if it’s public and you have permission), what you did, and the scope or result in plain terms. Recent and relevant beats big and old.
Commercial and state or local work counts. A buyer cares whether you’ve done similar work at a similar scale, not only whether it was federal.
4. Differentiators
This is the hardest section to write well because most people fill it with claims anyone could make: “quality,” “integrity,” “customer focus.” Instead, name things the reader can check or picture:
- Certifications or licenses relevant to the work
- Specific equipment, systems or staff you have in place
- Your response time or coverage area
- Specialized experience, such as working in secure or occupied facilities
If you can’t explain why a buyer would pick you over the next small business, work that out before you design the page.
5. Company data
This block is what lets a buyer verify you and file you correctly. Include:
- Legal company name (exactly as registered in SAM.gov)
- UEI and CAGE code (see what a UEI and CAGE code are)
- Primary and secondary NAICS codes
- Socioeconomic certifications you actually hold, such as 8(a), HUBZone, WOSB or SDVOSB
- Accepted payment methods, if relevant (for example, the government purchase card)
- A named point of contact with a direct phone number and email
- Your website
Double-check every number. A wrong CAGE code or an expired certification is an easy reason for a buyer to move on.
How to write a capability statement with no past performance
New contractors ask us this all the time. You don’t need company contracts to write a credible statement, but you do need to be honest about where your experience comes from.
The approach we use with clients is to build the statement around the owner’s and key staff’s resumes, then frame it at the company level. For example:
“Company personnel have experience providing facility maintenance for multi-building commercial campuses, including HVAC preventive maintenance and work-order management.”
That sentence is true, specific and useful to a buyer, as long as it matches what’s on the resume. What you should never do is invent contracts, inflate dollar values or list agencies you haven’t worked with. Buyers check, and a capability statement that falls apart under one phone call does lasting damage.
A few more ways to strengthen a new company’s statement:
- Use relevant commercial work. A private-sector job doing the same service is real experience.
- Name your team’s credentials. Licenses, certifications and years in the trade belong on the page if they’re relevant.
- Show your teaming plan. If you’re positioned to work as a subcontractor or partner, say so.
For a deeper look at building your record from zero, read past performance when you have none.
Capability statement format and design tips
You don’t need a designer to make a good one. You need clarity.
- One page. Front and back only if someone asks for more.
- Scannable layout. Two columns work well: competencies and differentiators on one side, past performance and company data on the other.
- Readable fonts and plenty of white space. If you have to shrink the text to fit, cut words instead.
- Your logo and brand colors, used sparingly.
- PDF format with a clear file name, like
CompanyName-Capability-Statement.pdf. - No dense paragraphs. Bullets and short lines carry more information per glance.
Common capability statement mistakes
These are issues we see often when we review statements:
- Generic language. “Full-service solutions provider” tells the reader nothing.
- Services that don’t match the NAICS codes. The mismatch makes it look like you don’t understand the work, or the codes.
- Information that doesn’t match SAM.gov. Different company names, outdated addresses or certifications that aren’t in your registration create doubt.
- Copying the same answer everywhere. If your differentiator and your past performance say the same thing, one of them is wasted.
- No direct contact. A general inbox with no name makes follow-up harder.
- One version for every buyer. A statement written for everyone doesn’t land with anyone.
How to use your capability statement
A capability statement only helps if it gets in front of the right people at the right time.
Responding to sources sought notices and RFIs
Agencies use requests for information when they’re planning a purchase and gathering market information (FAR 15.201). Many sources sought notices ask small businesses to submit a capability statement. Tailor yours to the notice: lead with the competencies and past performance that match the requirement, and answer every question the notice asks. If you’re not sure how these notices differ, see sources sought vs. RFI vs. RFP vs. RFQ.
Reaching out to prime contractors
Primes need reliable subcontractors, and your statement is often the first thing they see from you. Send a version that highlights the slice of work you’d perform and your coverage area. Our guide on how to become a government subcontractor covers how to find primes and start those conversations.
Meeting small business specialists
Agency small business offices and industry days are good places to share your statement in person. Bring copies and keep the PDF ready to send the same day.
Keeping it current
Update your statement every time something changes: a new contract, a new certification, a new NAICS code or a new point of contact. Keep track of who you sent it to and when, so your follow-ups don’t slip. Tracking those conversations alongside your bids in one pipeline keeps your outreach organized.
Match the page to the size representation and to Section M
The five blocks above are still the page. Before I send it, I check it against the offer I would sign.
| Check | What has to match |
|---|---|
| Identity | Legal name, doing-business-as name, and address match SAM.gov. FAR 4.1102 says the contract uses that name and address, with the exceptions in that section. |
| Registration | GSA’s registration list is the set I clear first: the Unique Entity ID from SAM.gov, a taxpayer identification number, an existing CAGE or NCAGE, electronic funds transfer, and the NAICS codes. I allow up to 10 business days after a change. I print an identifier only after it is active. |
| Size | Under FAR 19.301-1, the initial offer represents that I meet the size standard for the NAICS code in the solicitation. The contracting officer accepts that representation unless another offeror challenges it or the officer has reason to question it. Challenges go to SBA. After SBA determines I am not small, shrinking the company does not make me eligible for that award. A misrepresentation can bring penalties under the Small Business Act. I recheck the math on SBA’s get-started page: affiliates count, receipts use a five-year average, employees use a 24-month average, most manufacturing standards are 500 employees or fewer, and most non-manufacturing standards are receipts under $7.5 million, with exceptions. I look up my code before I print “small.” |
| Section M | On a sources sought, or on a page I send before a notice, I read the factors in the closest solicitation. FAR 15.204-5 is where Section M carries those factors. I lead with the competency that factor rewards. When the factor is past performance and the company has none, I keep the personnel wording this article already allows. |
I send the page to one office or one prime, and I follow up. The page gets the company ready and gives the reader proof. The proposal still answers the solicitation. The size line on the offer has to match the page I already handed out.
FAQ
What is a capability statement?
A capability statement is a one-page summary of your company written for government buyers and prime contractors. It shows what you do, how you’re different, what you’ve done before, and the company data a buyer needs to look you up, such as your UEI, CAGE code, NAICS codes and certifications.
How long should a capability statement be?
One page. Contracting officers and prime contractors skim, so a single page that answers who you are, what you do and how to reach you works better than a brochure. A front-and-back version is fine when a buyer asks for more detail, but start with one page.
What should I put on a capability statement if I have no past performance?
Use the experience of the people in your company. A line like “Company personnel have experience providing…” followed by real work from the owner’s or key staff’s resumes is honest and useful. Add relevant commercial work, and never invent contracts or results.
Do I need a capability statement to bid on government contracts?
No rule requires one to submit a proposal. But sources sought notices, RFIs, prime contractors and small business offices often ask for one, so most contractors need a current version ready to send.
Should my capability statement match my SAM.gov profile?
Yes. Your company name, UEI, CAGE code, NAICS codes and certifications should match SAM.gov exactly. Buyers often check SAM.gov after reading your statement, and mismatches create doubt.
Should I make a different capability statement for each opportunity?
Keep one master version, then tailor the core competencies, the order of your past performance and the NAICS codes you highlight for each agency or prime. A tailored statement shows the reader you understand their requirement.
Put your capability statement to work
A strong capability statement opens doors, but it works best when you’re sending it to the right opportunities. Govacha helps you find contracts that match your NAICS codes, track every sources sought response and bid in one place, and get hands-on help from our team when you need a second set of eyes.
Start for free to find your next opportunity. If you’d like a walkthrough with our team, book a demo.