USA Contract Solutions · You're one contract away.

How to Choose NAICS Codes for Government Contracts

Pick one primary NAICS code and a few secondary codes that match work you can perform, confirm you are small under each, and check them against real notices.

Choose NAICS codes by starting with the work you can actually deliver, not the codes you hope will bring in contracts. Find the code that best describes your main line of work and make it your primary code. Add a small number of secondary codes for other work you can staff today. Then confirm that you are small under each code’s SBA size standard, and test the codes against real notices before you lock them into your SAM.gov registration.

What a NAICS code does in government contracting

NAICS is the North American Industry Classification System. The U.S. Census Bureau publishes the codes, and each one describes an industry, such as a type of construction, a professional service, or a kind of manufacturing. The codes run from two digits (a broad sector) to six digits (a specific U.S. industry). In contracting, you work with the six-digit codes.

A code does three jobs for you:

  • It describes your business. SBA says a business will generally have a primary NAICS code, and it can have several if it sells several products or services.
  • It sets your size status. SBA assigns a size standard to each code. Whether you count as “small” depends on the code, not on your business in general.
  • It helps you and buyers find each other. Notices carry a code, and search tools filter by code. The NAICS code glossary entry covers the short definition.

The code on the notice is the one that counts for that competition. Under FAR 19.102, the contracting officer assigns one NAICS code and its size standard to each solicitation, chosen by the principal purpose of what is being bought. Your list of codes doesn’t change the code on a notice. It decides whether you see the notice, and whether you qualify as small when you get there.

Step 1: List the work you can actually deliver

Before you open any code list, write down what your business does today:

  • The services or products you sell, in plain words
  • The licenses, certifications, and equipment you have now
  • The cities, counties, or states you can cover
  • The largest job you could staff and finance

Be honest here. A code for work you can’t perform brings in notices you will pass on, and it can put you in a competition you aren’t ready for. This list is also the backbone of your capability statement, so the work does double duty.

Step 2: Search the official NAICS list

Go to the Census Bureau NAICS page and search with the plain words from your list. Read the full description for each code, including what it includes and what it excludes. Two codes can sound alike and cover different work.

A few practical habits help:

  • Search more than one way. “Janitorial,” “custodial,” and “building cleaning” may lead you to the same code, or to different ones.
  • Read the cross-references. A description often points to a neighboring code for related work.
  • Use the current edition. The Census site shows which NAICS year is in effect. Under FAR 19.102, new codes can’t be used in federal contracting until SBA publishes size standards for them, so check SBA’s table before you rely on a brand-new code.

Step 3: Pick one primary code and a few secondary codes

Your primary code is the one that best describes your main line of work, usually the work that brings in the most revenue. Your secondary codes cover other work you also perform.

There is no official ideal number of codes. The useful test is simple: for every code you add, can you show the work, staff it, and price it? If yes, it belongs. If you would pass on every notice under that code, it doesn’t.

Two mistakes are common:

  • Listing only one code when the business does several kinds of work. A painting company that also does drywall repair and parking lot striping may be missing notices filed under neighboring codes.
  • Listing dozens of codes the business can’t perform. That brings in noise, not wins, and it makes your profile harder to read.

Step 4: Check that you’re small under each code

Every NAICS code has its own SBA size standard. Some are based on average annual receipts, and some on number of employees. SBA notes that most manufacturers with 500 or fewer employees, and most non-manufacturers with average annual receipts under $7.5 million, qualify as small, but there are many exceptions by industry. Don’t rely on the general rule. Check every code.

Use the official sources:

When you calculate size, SBA counts your affiliates too. SBA’s size standards guidance explains that receipts are generally averaged over your latest five complete fiscal years, and employees are averaged over each pay period in the latest 24 months. If your size is close to a standard, or you have affiliates, get the answer checked before you bid a set-aside. SBA states there are severe penalties for knowingly misrepresenting size.

Size also depends on timing. FAR 19.102 says SBA determines size as of the date you represent that you are small in your initial offer, which includes price. Growing past a standard can change which set-asides you can bid.

Step 5: Test your codes against real notices

A code list is only good if it brings up work you want. Before you finalize it, test it:

  1. Search Contract Opportunities on SAM.gov by each code. Read a handful of notices under each one. Is this the work you do, at a size and location you can handle?
  2. Look at past awards on USAspending.gov for your codes. SBA points to it as a way to see which agencies buy what you sell and how often.
  3. Note which codes show up on notices you’d actually bid. If a code you skipped keeps appearing on work you want, add it. If a code you chose only brings notices you’d pass on, drop it.

Codes work best with keywords. Contracting officers write titles in plain language, so build a short list of the words they use for your work, and run each one as its own search. If a keyword brings too many results, pair it with your codes instead of making the keyword longer. The guide on how to find government contracts on SAM.gov walks through that search method.

Step 6: Put your codes in SAM.gov and keep them current

Once your list is set, add it to your SAM.gov registration. SAM.gov asks for your NAICS codes and size information as part of entity registration. That registration is free. If you haven’t finished yours, start with what a UEI and CAGE code are and the SAM.gov glossary entry.

SBA says your SAM profile is like a résumé, and that you should use accurate, descriptive terms so contracting officials can find you. Keep your codes consistent everywhere buyers look: SAM.gov, your SBA profile, your capability statement, and your website.

Review your codes when something changes: a new service, a new license or certification, a new location, or a jump in revenue or headcount. Size standards and NAICS editions are also revised from time to time, so check the official sources rather than an old printout.

When the code on a notice doesn’t match yours

You’ll see notices for work you do filed under a code you didn’t list. That’s normal. The contracting officer picks one code based on the principal purpose of the buy, and the job may span more than one industry.

What matters for that notice:

  • Size is judged against the notice’s code. If it’s a small business set-aside, you must be small under the size standard for the code on the notice, whether or not it’s in your list.
  • Read the scope, not just the code. Two notices can share a code and describe very different jobs. The guide on how to read a government solicitation shows what to read first.
  • A code can be appealed. SBA explains that a NAICS code designation can be appealed to SBA’s Office of Hearings and Appeals within 10 days of the solicitation’s publication, following 13 CFR 121.1102-1103.

If a notice under an unfamiliar code keeps matching your work, that’s a signal to add the code to your list.

How Govacha helps

Choosing codes is part of getting contract-ready, and it’s one of the first things we work through with new members. Govacha’s contract search lets you filter notices by code and keyword, so you can test your list against real work. GovChat AI can help you brainstorm keywords and candidate codes for your line of work; confirm any code it suggests on the Census and SBA sites. Live training and coaching covers SAM.gov, NAICS selection, and capability statements with hands-on support. If you’re just getting started, see new to government contracting.

Confirm the code you will represent on the offer

FAR 19.301-1 governs the offer. In the initial offer, I represent that I meet the size standard for the NAICS code on that solicitation. The contracting officer accepts the representation unless another offeror challenges it or the officer has reason to question it. The challenge goes to SBA. After SBA finds that I am not small, shrinking the company does not make me eligible for that award. A misrepresentation can bring penalties under the Small Business Act.

Use this list before the code goes on a capability statement or an offer.

  • The code is work I can perform and staff now.
  • I am small under that code today. SBA’s get-started page is the check: affiliates are included, federal receipts are a five-year average, employees are a 24-month average, most manufacturing standards are 500 employees or fewer, and most non-manufacturing standards are average receipts under $7.5 million, with exceptions. I look up my code.
  • The registration can carry the code. GSA’s registration list is the Unique Entity ID, a taxpayer identification number, a CAGE or NCAGE, electronic funds transfer, and the NAICS codes. I allow up to 10 business days after a change. SAM.gov, the capability statement, and the website show the same codes.
  • Section M still governs the write-up. FAR 15.204-5 is where a negotiated solicitation states the evaluation factors. I ask which factor this code supports. The code on the notice is the code in the size representation.
  • A wrong code on a live notice is the 10-day appeal to SBA’s Office of Hearings and Appeals described above.

I price the work I can staff, and I draft when the factor and the representation agree.

Frequently asked questions

How many NAICS codes should a small business have?

There’s no official number. Have one primary code for your main line of work and add secondary codes only for other work you can perform and staff today. If you would pass on every notice under a code, leave it off.

What is a primary NAICS code?

It’s the code that best describes your main line of business, usually the work that brings in the most revenue. SBA notes that a business generally has one primary code and can have several others.

Where do I find my NAICS code?

Search the official list on the U.S. Census Bureau NAICS page. Read each full description, including what it excludes, before you choose.

Can I bid on a contract with a NAICS code I didn’t list?

Often, yes. The contracting officer assigns one code to each solicitation. For a small business set-aside, you must be small under the size standard for the code on that notice. Read the solicitation’s eligibility and registration requirements for the specific rules.

How do I know if I’m small under a NAICS code?

Use SBA’s Size Standards Tool or SBA’s table of size standards. Each code has its own limit based on average annual receipts or number of employees, and your affiliates count toward your size.

Can I change my NAICS codes in SAM.gov?

Yes. You can update the codes in your SAM.gov entity registration. Update them when you add a service, license, or location, and keep them consistent with your SBA profile and capability statement.

Pick your codes, then test them on real work

Write down what you deliver, find your primary and secondary codes on the Census site, check each one against SBA’s size standards, and run them against live notices before you lock them into SAM.gov.

Start for free to search notices by your codes and keywords in one place. If you want a walkthrough with our team, book a demo.

Getting startednaicssam-govsize-standards