How to find government contracts on SAM.gov
Search SAM.gov Contract Opportunities by NAICS code, set-aside, and place of performance. Read each notice and its attachments, then decide bid or pass.
Federal contract notices are posted on SAM.gov, in Contract Opportunities. The search is on the government site. You can usually read a notice before your registration is finished. You still need an active registration when the notice requires one, which is the usual case for a federal award under FAR 4.1102 and FAR 52.204-7.
SAM.gov is not the whole market. The Census Bureau counted 91,438 local governments in 2025. State and local notices live on those governments’ own portals. More than 90,000 governments is that map. This page is the federal search.
Start with a code, not a vague word
Open Contract Opportunities and narrow the list by the work you perform before you type a keyword. A keyword such as “cleaning” or “software” returns notices that share a verb and not the job. The code on the notice is also the code that carries the size standard.
How to choose NAICS codes is how you pick the codes you can defend. FAR 19.301-1 says you represent, at the time of the initial offer, that you meet the size standard for the NAICS code identified in the solicitation. SBA describes those standards, including affiliates and the five-year receipts average for federal contracting, on its getting-started page. If the notice is set aside and you are not small for that code, the search hit is not a bid.
I also filter for place of performance and for any set-aside I can document. A notice in a state where I cannot put people is a notice I am reading for practice, not a notice I am pricing. FAR 19.502-2 is why so many buys above the micro-purchase threshold and not over the simplified acquisition threshold are set aside for small business, unless the contracting officer does not expect offers from at least two capable small firms. The dollar lines are in the simplified acquisition threshold.
Save the search. A pursuit that depends on someone remembering to look will miss a response date. When the results come back, I sort by response date and open the notices I could staff. I write the solicitation number, the office, and the notice type on the card before I download attachments, so a later amendment has a home. FAR 5.205 is why some of those hits are not solicitations at all. Special notices cover industry days, long-range procurement estimates, and draft specifications. I tag those as research. I do not put them in the proposal column. Do you need SAM.gov for a state bid? is the companion page. A state portal can ask for a UEI and still be a separate registration. Searching SAM.gov does not register you with a city or a school district. Contract search can hold the list you are working. It does not replace SAM.gov, and it does not submit a bid.
Read the notice, not the title
The title is a label. Open the description and every attachment. Write down:
- The notice type: sources sought, RFI, RFP, or RFQ. Those labels are different jobs. A sources sought is market research. It is not a contract you can win that day.
- The response date, the clock time, and the time zone. FAR 15.208 says that if no time is specified, proposals are due at 4:30 p.m. local time at the office the solicitation names. You are responsible for getting there by that time.
- Any earlier deadline for questions
- The place of performance and the period of performance
- The NAICS code and the set-aside, if any
- The instructions and the evaluation factors. On many federal RFPs those are Section L and Section M under FAR 15.204-5.
- Every amendment. FAR 15.206 requires an amendment when requirements or terms change, and amendments issued before the due time go to everyone who received the solicitation.
How to read a government solicitation is the method once the package is open. I do not decide bid or pass from the title line.
| What the notice shows | What I do with it |
|---|---|
| Notice type | Sources sought or RFI: answer the questions. RFP or RFQ: decide bid or pass before drafting. |
| NAICS and set-aside | Check size and any socioeconomic status the notice requires. If I cannot represent it, I pass. |
| Place and period | Confirm I can staff that site for that term, including option years the notice describes. |
| Instructions and factors | Build the outline from them. Page limits and file names are compliance items. |
| Amendments | Update the price and the technical file. A saved copy from last week may be the wrong requirement. |
Use award history to learn the office, then come back to the notice
USAspending.gov shows awards the government has already made. It is not a list of open solicitations. I use it to see which office buys the NAICS code, who the recipient was, and when the period of performance ends. How to use USAspending is that method. I do not copy a dollar total off a live screen into a proposal. I write down the office, the code, and the end date, then I watch SAM.gov for the recompete.
FAR 10.002 tells contracting officers to do market research, including reviewing the System for Award Management and the Federal Procurement Data System, and to ask whether small businesses can meet the need at fair market prices. Your search is the industry side of that same question. How to find the office that buys your work turns a pile of notices into a short list of buyers.
Forecasts and expiring awards are how you stop living on three-day deadlines. Forecasted, current, and expiring contracts splits the clocks. A current SAM.gov notice is the one with a response date. It is the middle of the cycle, not the whole market.
Decide bid or pass after someone has read the instructions
Save the notice, and decide after a person has read the instructions, the scope, and the evaluation factors. A pass with a reason is a result. The bid or no-bid checklist is the gate I use: can you be compliant, can you do the work, and can you price it.
Compliance includes the registration. GSA says to allow up to 10 business days after you submit for SAM registration to become active. If the response date is inside that window and the record is not Active, the honest decision is usually to pass or to team with a firm that is already registered, not to promise a file the provision will not accept. The exceptions are the ones FAR 4.1102 lists, and Alternate I of FAR 52.204-7 when the solicitation actually includes it. What a UEI and a CAGE code are explains the identifier. Neither page speeds up the government’s clock.
The work itself is the second gate. Licenses, place of performance, bonding, and a wage determination in an attachment are all part of “can you do it.” For service contracts over $2,500, FAR 22.1002-1 requires mandatory wage and fringe provisions. Price comes third. How to price a bid is the build-up. FAR 15.101-1 is the tradeoff, where a higher price can win. FAR 15.101-2 is lowest price technically acceptable. The notice tells you which one you opened.
A search routine I can repeat every week
- Get contract ready. Confirm the SAM record is Active, or write down the day you submitted and the day you will check again. The five steps start with this on purpose.
- Find contracts. Run the saved search for your NAICS codes, your places of performance, and the set-asides you can document. Open anything with a response date inside the window you can actually answer.
- Gather resources on the notices you might bid. A partner, a supplier quote, and the resumes the factor will score belong in the folder before the draft does. Past performance when you have none tells you when the factor is a reason to pass.
- Draft only after bid, not after “this looks interesting.” Follow the instructions and the evaluation factors.
- Submit in the method the notice names, early enough that FAR 15.208 is not the story of your week. Keep reading amendments until the deadline. Follow up if you win, and if a debrief is offered when you lose.
The pipeline is where the bid-or-pass note should live so next week’s search does not restart from zero. How it works is the same path on this site.
A checklist for each notice you save
- I know the notice type, and I am not writing a proposal for market research.
- I wrote down the response date, the time, and the time zone.
- I opened the attachments and the latest amendment.
- The NAICS code is one I can represent, and any set-aside is one I can document.
- I can perform in the place of performance with people or partners who have agreed.
- The SAM record will be Active when a federal offer is due, or the solicitation gives a different rule.
- Someone has said bid, team, or pass, and the reason is on the card.
If you are still getting the registration in place, read notices anyway. Learning the package is useful. Submitting without the registration the provision requires is not.
Frequently asked questions
Where are federal contract opportunities posted?
Federal contract opportunities are posted on SAM.gov, in Contract Opportunities. You read the notices on that government site. Registration in SAM is a separate step, required by FAR 4.1102 when you submit an offer or quotation, with the exceptions listed in that section.
Can I read a notice before my SAM registration is active?
You can usually read a notice before the record is marked Active. FAR 52.204-7 still requires you to be registered when you submit an offer or quotation and at time of award, unless the solicitation includes Alternate I. GSA says to allow up to 10 business days after you submit for the registration to become active.
What should I filter on before I type a keyword?
Start with the NAICS code for the work you perform, then the set-aside, the place of performance, and the response date. A keyword such as cleaning or software returns notices that share a word and not the job. The NAICS code on the notice is also the code that carries the size standard under FAR 19.301-1.
What is the difference between a SAM.gov notice and a USAspending record?
SAM.gov Contract Opportunities is where live federal notices are posted. USAspending.gov shows awards the government has already made. Use the award history to learn which office buys your NAICS code. Use SAM.gov to respond to a notice that is actually open.
What do I write down from a notice before I decide to bid?
Write down the notice type, the response date and time zone, any earlier deadline for questions, the place of performance, the NAICS code, any set-aside, and the attachments. Then read the instructions and the evaluation factors. A title is a label.
What if the notice changes after I save it?
FAR 15.206 requires the contracting officer to amend the solicitation when requirements or terms change. Amendments issued before the due time go to all parties receiving the solicitation. Read each amendment before you treat your saved copy as current.
Save one search you will actually open
Pick the NAICS codes you perform, the places you can staff, and a response window you can answer. Open the attachments. Write bid or pass on the card.
Start for Free to keep that search and the decision in one place. When you want to walk a live notice with our team, Book a Call.