USA Contract Solutions · You're one contract away.

What Is the Simplified Acquisition Threshold? A Small Business Guide

The simplified acquisition threshold is $350,000 and the micro-purchase threshold is $15,000. Here's what each means for small businesses and how to win contracts under them.

The simplified acquisition threshold (SAT) is the dollar limit under which federal agencies can buy with faster, lighter procedures. Under FAR 2.101 it’s $350,000 for most purchases. Below it sits the micro-purchase threshold of $15,000, where an authorized buyer can often pay with a government purchase card and skip formal competition. For small businesses, this range matters most: purchases above the micro-purchase threshold and up to the SAT are generally set aside for small businesses (FAR 13.003).

That’s the short answer. Below is how each threshold works, what changes as dollar values go up, and how to position your business to win these smaller, faster contracts.

The thresholds at a glance

Here are the numbers a new contractor should know, taken from the FAR as published on Acquisition.gov:

Dollar range What generally applies Source
Up to $15,000 Micro-purchase. Purchase card preferred; can be awarded without competitive quotes if the price is reasonable. FAR 2.101, 13.201, 13.203
Over $15,000 up to $350,000 Simplified acquisition procedures. Generally set aside for small businesses. FAR 13.003, 19.502-2
Over $25,000 Proposed contract action must be posted to SAM.gov (the GPE). FAR 5.101
Over $350,000 up to $9 million Simplified procedures allowed only for commercial products or services ($15 million in certain cases). FAR 13.500

A few exceptions are worth knowing. The micro-purchase threshold drops to $2,000 for construction covered by the federal construction wage rules and $2,500 for services covered by the Service Contract Labor Standards. Both thresholds go up for purchases supporting contingency operations, emergencies and certain disaster responses.

Thresholds change over time, and the FAR is being revised through the FAR Overhaul, with some agencies working under class deviations. Treat this table as a guide, and let the solicitation in front of you control.

What is the micro-purchase threshold?

A micro-purchase is any purchase at or below $15,000 (or the lower construction and service limits above). It’s the simplest way the government buys.

Here’s what makes micro-purchases different:

  • The purchase card is the preferred method. FAR 13.201 names the Governmentwide commercial purchase card as the preferred way to buy and pay for micro-purchases. Agencies give these cards to trained staff, and each card holder has a spending limit.
  • Competition isn’t required. Under FAR 13.203, an authorized buyer can award a micro-purchase without soliciting competitive quotes if they consider the price reasonable.
  • Buys should be spread around. The same section says micro-purchases should be distributed equitably among qualified suppliers, to the extent practicable. That’s an opening for new vendors.
  • Few clauses. Micro-purchases generally don’t require FAR provisions or clauses, with limited exceptions.

Do you need SAM.gov registration for a micro-purchase?

Sometimes not. FAR 4.1102 exempts micro-purchases where the purchase card is both the purchasing and the payment method. If the card is only used to pay, or the buy goes through another method, registration rules apply. In practice, register anyway: you’ll need an active SAM.gov registration for almost everything above a card purchase. Our guide to UEI and CAGE codes explains the identifiers you’ll get when you register.

What happens between $15,000 and $350,000

This is the simplified acquisition range, and it’s where many small businesses win their first federal contracts.

Agencies are told to use simplified procedures

FAR 13.003 says agencies shall use simplified acquisition procedures to the maximum extent practicable for purchases at or below the SAT. There are exceptions: if an agency can meet the need through required sources (such as Federal Supply Schedule contracts), an existing indefinite-delivery contract or another established contract, it may use that instead. That’s one reason holding a vehicle like a GSA Schedule can matter; see is a GSA Schedule worth it.

These buys are generally set aside for small businesses

Purchases above the micro-purchase threshold and up to the SAT are set aside for small businesses unless the contracting officer doesn’t reasonably expect offers from two or more responsible small businesses that are competitive on price, quality and delivery (FAR 19.502-2). That test is often called the “rule of two.”

Two details help small firms:

  • If only one acceptable offer comes in from a responsible small business on a set-aside, the contracting officer should award to that firm.
  • Contracting officers can also award under the 8(a), HUBZone, service-disabled veteran-owned and women-owned small business programs in this range (FAR 13.003).

To qualify, you must be small under the size standard for the NAICS code on the notice. If you’re not sure which codes fit, read how to choose NAICS codes, and see our glossary entry on set-asides.

Competition is lighter, but it still exists

Above the micro-purchase level, the contracting officer has to promote competition to the maximum extent practicable. When a buy isn’t posted to SAM.gov, FAR 13.104 says to consider soliciting at least three sources and, when practicable, to ask two sources that weren’t included in the previous solicitation. Contracting officers can solicit a single source when only one is reasonably available, for example because of urgency or exclusive licensing (FAR 13.106-1).

In plain terms: on many smaller buys, the government only needs a few quotes. If the buyer doesn’t know your company exists, you can’t be one of them.

Not every buy shows up on SAM.gov

FAR 5.101 requires agencies to post proposed contract actions expected to exceed $25,000 on SAM.gov. Between $20,000 and $25,000, the notice can be displayed in a public place or by electronic means. Below that, a buyer may simply call or email vendors for quotes. When notices do appear, the response window for buys between $25,000 and the SAT is whatever the contracting officer considers reasonable (FAR 5.203), so it can be short.

That’s why we tell contractors not to rely only on searching. Searching works, and our SAM.gov search guide shows how to do it well. But for smaller buys, relationships often decide who gets the call.

Don’t expect agencies to split big buys

FAR 13.003 prohibits breaking a requirement into smaller purchases just to get under a threshold. If a need is worth more than $350,000, expect it to be bought as one larger action.

Above $350,000: when simplified procedures stop

Above the SAT, agencies generally move to formal procedures under FAR Part 14 (sealed bidding) or Part 15 (negotiation). Those bring longer solicitations, more evaluation factors and, often, a past performance evaluation. The exception is commercial products and services: FAR 13.500 lets contracting officers use simplified procedures up to $9 million ($15 million in certain cases) when they expect only commercial offers.

If you’re bidding on larger work, our guide to reading a government solicitation walks through the sections that decide how you’re evaluated.

How to win contracts under the simplified acquisition threshold

The same playbook we teach new contractors works best in this range: make it easy for buyers to find you, know who buys what you sell, and respond fast.

1. Get your registration and profile right

Register in SAM.gov, pick accurate NAICS codes and keep your size status current. Buyers and small business specialists look up vendors before they ask for quotes. If your profile is thin or doesn’t match what you sell, you’re easy to skip.

2. Find the offices that buy what you sell

Use public spending data, such as USAspending.gov, to see which agency offices buy your products or services and how often. Look for offices with steady activity. Companies that show up once in an office’s history may be newer vendors, and some of those wins may come from smaller purchases. Our pricing guide shows how to use past award data to price your quotes.

3. Introduce yourself before the need exists

Reach out to the small business specialist and the program or contracting staff at your target offices. Send a short capability statement and ask good questions: Do they use purchase cards for this kind of work? How do they usually buy it? Which contract vehicles do they use? What’s coming up? A buyer who has your information can call you when a $10,000 or $40,000 need comes up.

4. Answer sources sought notices

Sources sought notices and RFIs are how contracting officers check whether enough small businesses exist to set a buy aside. Responding puts you on their radar and can help a requirement get set aside. See sources sought vs. RFI vs. RFP vs. RFQ for how to respond to each.

5. Quote fast and keep it simple

Simplified acquisitions often move quickly. Keep a ready-to-send quote template, your company data and your capability statement on hand so you can turn a request around the same day. Decide quickly whether each one is worth your time; our bid or no-bid guide gives you a checklist.

6. Use small wins to build past performance

A string of micro-purchases and small set-aside awards becomes real past performance. That record helps you compete for larger contracts above the SAT later. If you’re starting from zero, read past performance when you have none.

7. Don’t forget state and local buyers

State and local governments set their own thresholds and rules, and they differ by state. Search “[your state] procurement” to find your state’s purchasing site and its dollar tiers before you assume the federal numbers apply.

FAQ

What is the simplified acquisition threshold in 2026?

Under FAR 2.101, the simplified acquisition threshold is $350,000 for most federal purchases. Higher limits apply to certain contingency, emergency and disaster-related buys. Always confirm against the current FAR and the solicitation.

What is the micro-purchase threshold?

Under FAR 2.101, the micro-purchase threshold is $15,000 for most purchases. It is $2,000 for construction subject to the federal construction wage rules and $2,500 for services subject to the Service Contract Labor Standards. Higher limits apply in certain emergencies.

Are contracts under the simplified acquisition threshold set aside for small businesses?

Generally, yes. FAR 13.003 and FAR 19.502-2 say purchases above the micro-purchase threshold and up to the simplified acquisition threshold are set aside for small businesses, unless the contracting officer doesn’t expect offers from two or more responsible small businesses at fair market prices, quality and delivery.

Do I need to be registered in SAM.gov to get a micro-purchase?

Not always. FAR 4.1102 exempts micro-purchases where the government purchase card is both the purchasing and payment method. For most other federal awards you must be registered in SAM.gov when you submit your quote or offer, so register anyway.

Are all simplified acquisitions posted on SAM.gov?

No. FAR 5.101 requires posting to SAM.gov for proposed contract actions expected to exceed $25,000. Smaller buys may be posted locally, solicited orally or quoted from a few known sources, which is why agencies need to know you before the need comes up.

Can an agency buy directly from my company without competition?

For micro-purchases, yes. FAR 13.203 lets an authorized buyer award without soliciting competitive quotes if the price is reasonable, and asks that micro-purchases be spread fairly among qualified suppliers. Above that, the buyer generally has to seek competition, though a single source is allowed when only one is reasonably available.

Start winning smaller contracts

Simplified acquisitions are one of the most practical ways for a small business to get its first federal award, but only if buyers can find you and you can respond quickly. Govacha helps you find contracts that match your NAICS codes, track every quote and bid in one pipeline, and get hands-on help from our team when you want a second set of eyes.

Start for free to find your next opportunity. If you’d like a walkthrough with our team, book a demo.

Getting startedsimplified-acquisitionmicro-purchaseset-asidessmall-business