USA Contract Solutions · You're one contract away.

How to Win Government Contracts in Georgia: Federal, State and Local Guide

Georgia ranked 17th among the 50 states for FY2025 federal contract obligations, at $12,002,536,974. Use this path to register, search bids, and compete.

Georgia ranked 17th among the 50 states for federal contract obligations performed in the state in fiscal year 2025. USAspending reports $12,002,536,974 for contract award types with a place of performance in Georgia, from October 1, 2024 through September 30, 2025. Aircraft manufacturing, engineering, construction, facilities support, and computer systems design carry the largest industry totals. State purchasing runs through the Department of Administrative Services, with competitive bidding at $25,000 and public posting on the Georgia Procurement Registry.

An earlier note put Georgia near 18th. That lines up if the District of Columbia is left in the list. DC had $31,495,546,982 in contract obligations in the same filter, and it is not one of the 50 states. Among states only, Georgia is 17th, behind Illinois and ahead of Tennessee.

What the federal government buys in Georgia

These figures come from the USAspending spending-by-geography and spending-by-category endpoints. The filters are place of performance in Georgia, fiscal year 2025, and contract award types A, B, C, and D. Dollars are rounded to the nearest dollar. The state profile mixes in grants and other spending, so its headline will not match this contract-only total. How to use USAspending is the way I read an award record. Re-run the filter before you put a figure in a proposal.

The largest awarding agencies:

Awarding agency FY2025 contract obligations
Department of Defense $8,676,347,018
General Services Administration $927,848,127
Department of Health and Human Services $778,414,594
Department of Homeland Security $499,693,962
Department of Agriculture $321,424,588
Department of Veterans Affairs $312,401,276

Inside those departments, the Air Force is $4,140,014,339, the Army is $2,380,690,490, and the Navy is $908,043,362. The Federal Acquisition Service is $846,890,581. The Defense Logistics Agency is $787,375,409. The Centers for Disease Control and Prevention is $627,026,500. Atlanta’s federal campus is visible in that CDC line. A health-services firm that only searches “hospital” will miss it.

The largest industries:

NAICS Industry Obligations
336411 Aircraft manufacturing $2,514,244,070
541330 Engineering services $1,023,875,600
236220 Commercial and institutional building construction $867,732,484
561210 Facilities support services $792,401,969
541715 Research and development in the physical, engineering, and life sciences (except nanotechnology and biotechnology) $773,762,728
541512 Computer systems design services $567,801,647

Lockheed Martin Corp received $2,568,782,893, which lines up with the aircraft-manufacturing total. Georgia Tech Applied Research Corporation received $598,973,620. Booz Allen Hamilton Inc. received $230,372,417. International Auto Logistics, LLC received $229,335,963. ACC Construction Co., Inc. received $221,048,143. The manufacturing prime is one story. Engineering, construction, facilities support, research, and computer systems design are the stories a smaller firm can actually enter, as a prime on a narrower job or as a subcontractor to the firms already on the base.

Translate a few of your words before you search. This is a sample, not a full list:

  • “planes” or “parts for aircraft” points at NAICS 336411, and also at the Air Force offices that buy around that plant
  • “janitorial,” “base operations,” or “grounds” often sits in facilities support, NAICS 561210
  • “software staff” or “help desk” often sits in computer systems design, NAICS 541512
  • “building” on a federal job is often NAICS 236220, commercial and institutional construction

How to choose NAICS codes keeps the federal search honest. Georgia state bids use NIGP codes inside the supplier registration. Use both.

Where Georgia posts state bids, and how you register

The Department of Administrative Services, State Purchasing Division, is the central purchasing office. How to get a contract with the state says you start by registering in GA@WORK Marketplace for Suppliers. You will need a tax ID, the business address, NIGP codes for what you sell, gross receipts, and a mailbox that a buyer can actually reach. After registration, matching events can come by email. You can also search without waiting for the email.

The public search is the Georgia Procurement Registry. DOAS describes it as the place bidding events are listed. Team Georgia Marketplace is the older name still on the department’s site. The State Accounting Office explains the split: GA@WORK Marketplace for Suppliers is procurement, bidding, and certifications. A separate supplier portal is for payments, invoices, and bank details. Register for the bidding account even if you already get paid by some agency. How to reach the procurement systems shows which login is for suppliers.

DOAS says Georgia law requires posting to the registry when goods, services, or both are valued at $100,000 or more, and for public-works construction contracts subject to the state public-works statute at $100,000 or more. Below that, a state entity may buy without a registry posting. That is why watching only the registry misses a band of smaller work, and why your NIGP codes and a relationship with the buyer still matter.

Federal notices performed in Georgia are on SAM.gov. Whether you need SAM.gov for a state bid depends on the form. Get the UEI before a deadline, not the afternoon of it.

Georgia’s competitive bidding line

Georgia does not use the federal word “micro-purchase” in the manual I read. The line that changes the rules is the competitive bidding threshold.

The Georgia Procurement Manual (version 12, February 2026) says that under O.C.G.A. section 50-5-69, purchases of $25,000 or more must be competitively bid unless an exemption applies. The threshold covers goods or services at $25,000 or more regardless of whether the entity pays by purchase order, contract, or another method. It also covers certain revenue, cost-savings, and third-party payment arrangements when the supplier is expected to receive $25,000 or more. Under $25,000, competitive bidding is not required. State Purchasing recommends comparing products and prices from at least three suppliers, including convenience statewide contracts, before you order.

Do not split a need to stay under $25,000. The manual treats that as a problem, and buyers know the pattern. Federal work performed in Georgia still follows the Federal Acquisition Regulation. The federal thresholds are a different set of numbers. The notice you are answering is the one that counts.

Small-business, minority, women, and veteran certifications

DOAS runs the Georgia Business Certification Program. The how-to page lists six types: minority-owned, veteran-owned, women-owned, and the small version of each. You apply inside GA@WORK after you have a supplier ID. There is no DOAS application fee. You must be domiciled in Georgia, and you must already hold a certification from one of the approved partners. The department’s materials name the Georgia Department of Transportation for disadvantaged business enterprises, the Georgia Minority Supplier Development Council, the Greater Women’s Business Council, the National Veteran-Owned Business Association, the U.S. Small Business Administration, and the U.S. Pan Asian American Chamber of Commerce. The state certificate is a second step, not the first.

The same procurement manual defines a small business, citing O.C.G.A. sections 50-5-121 and 50-5-122, as independently owned and operated and in one of three tiers:

  • Tier one: 10 or fewer employees, or $1 million or less in gross receipts a year
  • Tier two: 100 or fewer employees, or $10 million or less
  • Tier three: 300 or fewer employees, or $30 million or less

The manual says the tier is for reporting, and that small businesses can receive a price-match opportunity or up to 5 percent of the available points on an RFP or RFQC, as that section spells out. Read the solicitation. A preference you assume is in every bid is how people build a price around a rule that is not on the page.

Minority-owned, women-owned, and veteran-owned definitions in the program require at least 51 percent ownership and control, Georgia domicile, and taxes paid. A veteran, for this program, includes specified active-duty service without a dishonorable discharge, and certain reserve or National Guard service called to federal active duty. I am paraphrasing the manual. The statute controls if a fact pattern is close.

Federal set-asides still use SBA programs. SBA’s contracting assistance programs are the federal door. A Georgia certificate does not replace an SBA certification on a federal set-aside.

Cities, counties, schools, and universities

The Census Bureau counted 91,438 local governments in 2025. The map is why the registry is not the whole market. These Georgia buyers had a live purchasing page when I checked:

Fulton County’s bid page states its own competition bands: up to $2,499.99 with no bids or quotes required, $2,500 to $49,999.99 with a minimum of five quotes, and $50,000 or more as a formal sealed invitation or request for proposal. DeKalb’s purchasing page says informal sealed solicitations are sought under $50,000 and formal sealed solicitations are required over $50,000. Those are county rules, not the state’s $25,000 line. Read the county you are selling to.

The City of Atlanta’s procurement site did not return a page I could verify, so I am not linking it. Atlanta Public Schools did. If you sell to the city, confirm the current portal on a browser before you tell a customer you are registered there.

How I would run the five steps in Georgia

The sequence is the one in five steps to win government contracts.

1. Get contract ready. Register in GA@WORK as a bidder or supplier. Select NIGP codes for what you sell. If you qualify, finish the partner certification and then the Georgia Business Certification. Start SAM.gov for Air Force, Army, CDC, GSA, and VA work. A capability statement introduces the firm after the registration exists.

2. Find contracts. Search the Georgia Procurement Registry and the county pages on a schedule. Search SAM.gov by NAICS and by place of performance in Georgia. Samples of the translation: “cleaning” becomes facilities support; “engineering design” becomes NAICS 541330; “staff augmentation for IT” becomes computer systems design. Save the searches. Contract search holds the list. It does not submit the bid.

3. Gather resources and solutions. Resumes, licenses, a price built from cost, and subcontractors who have agreed in writing. Past performance when you have none is the honest version of a thin file. Pricing comes from your books. If the path is a subcontract to a large aircraft or research prime, treat the teaming agreement as the product. A named partner who has not agreed is not a resource.

4. Draft the proposal. Read instructions and evaluation factors first. How to read a solicitation is the order. We once lost a contract with the best price because we didn’t demonstrate domain authority. Georgia RFPs that offer small-business points still score the rest of the file. A 5 percent bump does not repair a solution the evaluator cannot see.

5. Submit the bid and follow up. Use the portal and the deadline on that notice. Watch addenda. Take a debrief when one is offered. Then run the next notice with the gap closed. A bid or no-bid decision before you draft will save more money than a late night on a job you cannot staff.

A month I would actually spend

Week one is GA@WORK and, if federal work is in the plan, SAM.gov. Week two is NIGP codes, NAICS codes, and a saved search on the registry plus one county. Week three is a single notice read to the end, with the $25,000 state line or the county’s own line written in the margin so you know which rule you are under. Week four is the response or a written pass.

The aircraft total is real. Most Georgia firms will win somewhere else on this list: a facilities job, an engineering task, a school district purchase, or a subcontract. Pick the lane you can perform.

FAQ

Where does Georgia rank for federal contracts?

Among the 50 states, Georgia is 17th for fiscal year 2025 federal contract obligations by place of performance. USAspending reports $12,002,536,974 for contract award types from October 1, 2024 through September 30, 2025. The District of Columbia is not in that ranking.

What is Georgia’s competitive bidding threshold?

The Georgia Procurement Manual, citing O.C.G.A. section 50-5-69, says purchases of $25,000 or more must be competitively bid unless an exemption applies. Under $25,000, competition is not required. State Purchasing still recommends comparing products and prices from at least three suppliers.

Where are Georgia state bids posted?

Search the Georgia Procurement Registry for bidding events. To submit an electronic bid you register in GA@WORK Marketplace for Suppliers. Team Georgia Marketplace was the prior name of the supplier system.

How do I get a Georgia minority, women, or veteran certification?

The Department of Administrative Services certifies minority-owned, veteran-owned, and women-owned businesses, including small versions of each. You must be a Georgia-domiciled business, hold a certification from an approved partner organization, and apply in GA@WORK. There is no DOAS fee to apply.

Which local buys must appear on the Georgia Procurement Registry?

DOAS says Georgia law requires a bid or proposal to be posted on the Georgia Procurement Registry when it is for goods, services, or both valued at $100,000 or more, and for certain public-works construction contracts at $100,000 or more. Smaller local buys can live only on the city or county site.

Do I need SAM.gov to bid a Georgia state contract?

Federal offers generally need an active SAM.gov registration. A Georgia state bid needs a GA@WORK supplier or bidder registration. Read the notice. Some state and local forms still ask for the Unique Entity ID that SAM.gov issues.

Start with the registration, then the notice

Georgia’s federal total is concentrated, and the state and county rules are written down. The work goes to firms a buyer can find, with people and pricing that match the notice.

Start for Free to look for the next notice and keep the pursuit in one place. If you want a walkthrough with our team, Book a Call.

Getting startedstate-guidegeorgiaprocurementsmall-business